• Gladaed@feddit.org
    link
    fedilink
    English
    arrow-up
    31
    ·
    1 day ago

    Grewn flames would usually mean copper is being burned. Afaik copper isn’t usually used in gas lines so that would be strange indeed.

    They probably put some copper, boron or barium source on their burners.

    • Mothra@mander.xyz
      link
      fedilink
      English
      arrow-up
      16
      ·
      1 day ago

      Or Photoshop.

      Also I’ve burned copper wire for fun and the green flame appears for just a second or so, once it burns (I guess the surface oxidizes? ) it stops. If they put copper on the burners they must have some impressive coordination and speed to turn all three and snap the photo before the reaction is over

    • GreenKnight23@lemmy.world
      link
      fedilink
      English
      arrow-up
      8
      ·
      1 day ago

      Afaik copper isn’t usually used in gas lines so that would be strange indeed.

      it isn’t anymore but was common to run from a trunk to the appliance before flexible tubing showed up.

      source: I have copper gas lines in my home as well as flexible appliance lines. copper was phased out because of the amount of prep required to install vs flexible tubing. also flexible tubing is less prone to having it’s joints leak due to it being less rigid.

      • zout@fedia.io
        link
        fedilink
        arrow-up
        3
        ·
        1 day ago

        It depends on where you live, here in the Netherlands these days some plastic flexible tubing is used, but about 15-20 years ago this wasn’t allowed and it was copper tubing everywhere. A little longer ago it was also soldered tubing only, they changed that because a lot of gas lines run below floors in older houses and soldering with a burner is dangerous there. Anyway, if you have a house which was built before 2000, you probably have copper gas lines over here.